• Estimated Lead Time : In stock. Usually ships in 7-10 working days.

• Manufacturer : Mitsubishi Electric

• AJ65BTB1-16DT

• CC-Link remote I / O unit (DC input / transistor output, terminal block) AJ65BTB1-16DT

• Input specification :

• Input format : DC input (plus common type)

• Number of input points : 8 points

• Rated input voltage : DC 24 V (ripple ratio within 5%) (Allowable voltage range DC 19.2 to 28.8 V)

• Rated input current : About 7 mA

• Maximum number of simultaneous input points : 100%

• ON voltage / ON current : 14 V or more / 3.5 mA or more

• OFF voltage / OFF current : 6 V or less / 1.7 mA or less

• Input resistance : About 3.3 k惟

• Input response time OFF ??ON : 10 ms or less

• ON ??OFF : 10 ms or less

• Input common type : 8 points / common (terminal trapezoid 1 wire type)

• Input isolation method : Photocoupler isolation

• Output format : Transistor output (sink type)

• Number of output points : 8 points

• Rated load voltage : DC12 / 24V (ripple ratio within 5%)

• Used load voltage range : DC 10.2 to 28.8 V

• Maximum load current : 0.5 A / 1 point, 4 A / 1 common

• Maximum inrush current : 4 A 10 ms or less

• Leakage current at OFF : 0.1 mA or less

• Maximum voltage drop during ON : DC 0.9 V or less (TYP.) 0.5 A, DC 1.5 V or less (MAX.) 0.5 A

• Output response time OFF ??ON : 2 ms or less

• ON ??OFF : 2 ms or less (resistance load)

• Surge suppressor : Zener diode

• Output section External power supply Voltage : DC 12/24 V (ripple ratio within 5%) (allowable voltage range DC 10.2 to 28.8 V)

• Current : 50 mA or less (TYP. DC 24 V, per common) External load current is not included

• Output common method : 8 points / common (terminal trapezoid 1 wire type)

• Output isolation method : Photocoupler isolation

• Withstand voltage : Between DC external terminal and ground: AC 500 V for 1 minute

• Insulation resistance : DC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 M惟 or more

• Station type : Remote I / O station

• Number of occupied stations : 1 station

• Unit power supply Voltage : DC 24 V (ripple ratio within 5%) (allowable voltage range DC 15.6 to 28.8 V)

• Current : 70 mA or less (TYP. At 24 VDC)

• External wiring connection method : Communication part, Unit power supply part: 7 points 2 piece terminal block (M3.5 screw) I / O power supply part, input / output part: 27 points 2 piece terminal block (M3.5 screw)

• External dimensions Height (H) : 65 mm

• Width (W) : 151.9 mm

• Depth (D) : 46 mm

• mass : 0.33 Kg

• Operating ambient temperature : 0 to 55 掳 C

• Storage ambient temperature : -20 to 75 掳 C

• Ambient operating humidity : 10 to 90% RH, non condensing

• Storage ambient humidity : 10 to 90% RH, non condensing

• Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

• When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2

• Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

• Use atmosphere : No corrosive gas

• Use elevation : 0 to 2000 m

• Installation location : In the control panel

• Over voltage category : II or less

• Pollution degree : 2 or less

• Shipping Weight : 1.3 Kg