• Estimated Lead Time: 4-6 Weeks 聽

• Manufacturer: Omron

• E32-D61 2M

• Type: Environment resistive models

• Heat resistant

• Standard models

• The Standard for Fiber Amplifiers with Simple Operation and High Performance

• Operation so simple that essentially anyone can use the amplifier right way.

• Immediately determine operation and amount of light with a simple, bright display.

• General-purpose capabilities to simply handle a broad range of applications.

• Models with connectors have a dielectric strength of 500 VAC.

• Light source (wavelength): Red LED (620 nm)

• Power supply voltage: 12 to 24 VDC 卤10%, ripple (p-p): 10% max.

960 mW max. (Power supply: 2 4 V, Current consumption: 40 mA max.)

• Current consumption Light source (wavelength): Red LED (620 nm)

• Current consumption Power supply voltage: 12 to 24 VDC 卤10%, ripple (p-p): 10% max.

• Current consumption Current consumption: 960 mW max. (Power supply: 24 V, Current consumption: 40 mA max.)

• Current consumption Control output: Open-collector output (NPN or PNP)

Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1.5 V max.)

Light-ON/Dark-ON mode selector

• Current consumption Response time: Operate or reset: 200 s max.

• Current consumption Sensitivity adjustment: UP/DOWN direct key setting, teaching

• Current consumption Protection circuits: Power supply reverse polarity protection, output short-circuit protection, output

reverse polarity protection

• Current consumption Timer function: ON/OFF-delay timer: 10 ms (each fixed)

• Current consumption Mutual interference

prevention: Up to 5 Amplifiers (optically synchronized)

• Current consumption Ambient illumination: Receiver side

Incandescent lamp: 10,000 lux max.

Sunlight: 20,000 lux max.

• Current consumption Ambient temperature range: Operating:

Groups of 1 to 3 Amplifiers: -25掳C to 55掳C

Groups of 4 to 11 Amplifiers: -25掳C to 50掳C

Groups of 12 to 16 Amplifiers: -25掳C to 45掳C

Storage: -30掳C to 70掳C (with no icing or condensation)

• Current consumption Ambient humidity range: Operating and storage: 35% to 85% (with no condensation)

• Current consumption Insulation resistance: 20 M . min. (at 500 VDC)

• Current consumption Dielectric strength: 1,000 VAC at 50/60 Hz for 1 minute (*)

• Current consumption Vibration resistance: Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z

directions

• Current consumption Shock resistance: Destruction: 500 m/s2, for 3 times each in X, Y and Z directions

• Current consumption Degree of protection: IEC 60529 IP50 (with Protective Cover attached)

• Current consumption Connection method: Pre-wired (standard cable length: 2 m), or connector

• Material:Material Case: Polybutylene terephthalate (PBT) 聽

• Material Cover: Polycarbonate

• Accessories: Instruction manual

• Control output: Open-collector output (NPN or PNP)

Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1.5 V max.)

Light-ON/Dark-ON mode selector

• Response time: Operate or reset: 200 s max.

• Sensitivity adjustment: UP/DOWN direct key setting, teaching

• Protection circuits: Power supply reverse polarity protection, output short-circuit protection, output

reverse polarity protection

• Timer function: ON/OFF-delay timer: 10 ms (each fixed)

• Mutual interference

prevention: Up to 5 Amplifiers (optically synchronized)

• Ambient illumination: Receiver side

Incandescent lamp: 10,000 lux max.

Sunlight: 20,000 lux max.

• Ambient temperature range: Operating:

Groups of 1 to 3 Amplifiers: -25掳C to 55掳C

Groups of 4 to 11 Amplifiers: -25掳C to 50掳C

Groups of 12 to 16 Amplifiers: -25掳C to 45掳C

Storage: -30掳C to 70掳C (with no icing or condensation)

• Ambient humidity range: Operating and storage: 35% to 85% (with no condensation)

• Insulation resistance: 20 M . min. (at 500 VDC)

• Dielectric strength: 1,000 VAC at 50/60 Hz for 1 minute (*)

• Vibration resistance: Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z

directions

• Shock resistance: Destruction: 500 m/s2, for 3 times each in X, Y and Z directions

• Degree of protection: IEC 60529 IP50 (with Protective Cover attached)

• Connection method: Pre-wired (standard cable length: 2 m), or connector

• Weight (packed state): Pre-wired model: Approx. 100 g, Model with connector: Approx. 55 g

• Material Case: Polybutylene terephthalate (PBT)

• Material Cover: Polycarbonate

• Accessories: Instruction manual

• Shipping Weight: 1.1Kg