• Estimated Lead Time : In stock. Usually ships in 7-10 working days

• Manufacturer : Mitsubishi Electric

• FX0N-3A

• Analog input- Analog input range Voltage input : DC 0 V to 10 V, DC 0 V to 5 V (input resistance 200 k惟)

• Current input : DC 4 to 20 mA (input resistance 250 惟)

• Number of input channels : 2 channels

• Absolute maximum input Voltage input : -0.5V, + 15V

• Current input : -2mA, + 60mA

• Input characteristic : 路 Voltage input and current input can not be used together. , 路 Input characteristics are the same for both channels. , 路 Input characteristics can be adjusted with the OFFSET / GAIN volume.

• Digital output : 8 bit binary

• resolution Voltage input : In the case of DC 0 V to 10 V: 40 mV (10 V x 1/250) In the case of DC 0 V to 5 V: 20 mV (5 V x 1/250)

• Current input : 64 渭A (16 mA 脳 1/250)

• Overall accuracy Voltage input : 卤 1% (卤 0.1 V) for full-scale 10 V, the same applies (卤 0.1 V) even when DC 0 V to 5 V is input

• Current input : 卤 1% (卤 0.16 mA) against full scale 16 mA

• A / D conversion time : TO instruction processing time 脳 2 + FROM instruction processing time (sequence program and synchronous operation)

• Insulation method : 路 Isolated between the analog input unit and the sequencer by a photocoupler 路 Not isolated between each channel

• Analog output Analog output range Voltage output : DC 0 V to 10 V, DC 0 V to 5 V (external load resistance 1 k惟 to 1 M惟)

• Current output : DC 4 mA to 20 mA (external load resistance 500 惟 or less)

• Number of output channels : 1 channel

• Output characteristics : Output characteristics can be adjusted with the OFFSET / GAIN volume.

• Digital input : 8 bit binary

• resolution Voltage output : In the case of DC 0 V to 10 V: 40 mV (10 V x 1/250) In the case of DC 0 V to 5 V: 20 mV (5 V x 1/250)

• Current output : In the case of 4 mA to 20 mA of DC: 64 渭A (16 mA 脳 1/250)

• Overall accuracy Voltage output : 卤 0.1 V

• Current output : 卤 0.16 mA

• D / A conversion time : TO instruction processing time 脳 3 (sequence program and synchronous operation)

• Insulation method : 路 Isolated between the analog output unit and the sequencer by a photocoupler 路 Not isolated between each channel

• I / O occupancy points : 8 points (can be counted either input or output)

• Applicable sequencer : FX1N, FX2N, FX3U, FX1NC, FX2NC, FX3UC The connection to FX1NC, FX2NC requires FX2NC-CNV-IF. Connection to FX3UC requires FX2NC-CNV-IF or FX3UC-1PS-5V.

• mass : 0.2 kg

• Power supply specification :

• Power supply : 5VDC 30mA (internal power supply from sequencer) 24VDC 卤 10% 90mA (internal power supply from sequencer)

• Ambient temperature : 0 to 55 掳 C 路 路 路 路 -25 to 75 掳 C 路 路 路 路 路 路

• Relative humidity : 5 to 95% RH (without condensation)

• Vibration resistance When mounting DIN rail Frequency: 10 to 57 Hz : Single amplitude: 0.035 mm X, Y, Z each direction 10 times (total 80 minutes each)

• Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z each direction 10 times (total 80 minutes each)

• Direct mounting Frequency: 10 to 57 Hz : Single amplitude: 0.075 mm X, Y, Z each direction 10 times (total 80 minutes each)

• Direct mounting Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 X, Y, Z each 10 times (total 80 minutes each)

• Shock resistance : 147 m / s 2 , action time 11 ms, sine half-wave pulse 3 times in X, Y, Z directions

• Noise resistant : Noise voltage: 1,000 Vp-p, noise width: 1 渭s, rise time: 1 ns, period: 30 to 100 Hz noise simulator

• Withstand voltage : Between all terminals and ground terminal: AC500V 1 minute

• Insulation resistance : Between all terminals and between ground terminals: 5 M惟 or more with DC 500 V insulation resistance tester

• Use atmosphere : Corrosive, no flammable gas, no severe conductive dust (dust)

• Use altitude : It can not be used in an environment pressurized to 2000 m or less at atmospheric pressure or higher. There is a possibility of breakdown.

• Shipping Weight : 1.2 Kg