• Estimated Lead Time : In stock. Usually ships in 7-10 working days.

• Manufacturer : Mitsubishi Electric

• FX2N-48ER-ES/UL

• I / O expansion unit FX2N - 48ER - ES / UL

• Application sequencer : FX1N, FX3G, FX2N, FX3U

• mass : 0.85 kg

• Rated voltage : AC 100 V to 240 V

• Voltage tolerance range : AC 85V ~ 264V

• Rated frequency : 50/60 Hz

• Power supply fuse : 250 V 5 A

• Inrush current : AC 100 V: maximum 40 A 5 ms or less聽tengah AC 200 V: maximum 60 A 5 ms or less

• power consumption : 35W

• 24 VDC service power supply : 24 VDC 460 mA or less When聽tengah connecting input / output extension block, 24 VDC service power is consumed.

• Number of input points : 24 points

• Input connection shape : Removable terminal block (M3 screw)

• Input format : Sink / source

• Input signal voltage : DC 24 V 卤 10%

• Input impedance : 4.3 kO

• Input signal current : 5 mA / 24 VDC

• Input ON sensitivity current : 3.5 mA or more

• Input OFF sensitivity current : 1.5 mA or less

• Input response time : About 10 ms

• Input signal format : Sink: no-voltage contact input or NPN open collector transistor聽tengah source: no-voltage contact input or PNP open collector transistor

• Input circuit insulation : Photocoupler insulation

• Input operation display : LED on the panel when input is ON

• Number of output points : 24 points

• Output connection shape : Removable terminal block (M3 screw)

• Output type / format : relay

• External power supply: DC聽tengah 30聽V or less聽AC聽240 V or聽less (When not compliant with CE, UL, cUL standard, AC聽250聽V or less)

• Maximum load Resistive load: tengah Please set the total load current per聽2A / 1 point聽common as follows.聽tengah 路 Output 4 points / common: 8 A or less聽tengah 路 Output 8 points / common: 8 A or less

• Inductive load : 80VA

• Minimum load : DC 5 V 2 mA (reference value)

• Response time OFF ? ON : About 10 ms

• ON ? OFF : About 10 ms

• Circuit insulation : Mechanical insulation

• Output operation indication : LED lit when relay coil is energized

• Ambient temperature : 0 to 55 掳 C. 路路路 Operating -25 to 75 掳 C. 路路路路路 Save

• Relative humidity : 5 to 95% RH (noncondensing) 路 路 路 路 in operation

• Anti-vibration when DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The聽tengah criteria are based on IEC 61131-2

• Anti-vibration when DIN rail is installed Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s聽2 Ten times in each of X, Y, Z directions (total of 80 minutes each) The聽tengah criterion is based on IEC 61131-2

• Anti-vibration direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total) The聽tengah criteria are based on IEC 61131-2

• Anti-vibration direct installation Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s聽2 X, Y, Z 10 times in each direction (80 minutes in total) The聽tengah criteria are based on IEC 61131-2

• Impact resistance : 147 m / s聽2聽, working time 11 ms,聽tengah criterion for judgment聽three times in X, Y, Z directions by sine half-wave pulse聽is according to IEC 61131-2

• Noise immunity: Noise voltage with 1,000 Vp-p, noise width 1 碌s, rising 1 ns, with noise si

• tor with period of 30 to 100 Hz

• Withstand voltage : Between the power supply terminal (AC power supply) and the earth terminal: AC 1500 V for 1 minute聽tengah 24 VDC Service power supply and between the input terminal (24 VDC) and the earth terminal: 500聽tengah V AC for 1 minute Between the output terminal (relay)

• Insulation resistance : Between each terminal and earth terminal: 500 MV DC 500 MO or more with an insulation resistance meter

• ground : Class D grounding (grounding resistance: 100 O or less) 聽tengah Grounding should be dedicated ground or common ground.

• Use atmosphere: There is no corrosive property, flammable gas, conductive dust (dust) is not serious

• Use altitude : Can not be used in an environment pressurized to聽2000 m or less under聽atmospheric pressure.聽It may break down.

• Shipping Weight : 2 Kg