• Estimated Lead Time : In stock. Usually ships in 3 - 5 working days.

• Manufacturer : Mitsubishi Electric

• FX2NC-16EX

• Input extension block

• Application sequencer : FX1NC, FX3GC, FX2NC, FX3UC

• mass : 0.15 Kg

• Rated voltage : Internal power supply from the sequencer

• power consumption : 2.2 W

• Input specification :

• Number of input points : 16 points

• Input connection shape : connector

• Input format : sink

• Input signal voltage : DC 24 V + 20% - 15% ripple (pp) within 5%

• Input impedance : 4.3 kO

• Input signal current : 5 mA / 24 VDC

• Input ON sensitivity current : 3.5 mA or more

• Input OFF sensitivity current : 1.5 mA or less

• Input response time : About 10 ms

• Input signal format : No-voltage contact input or NPN open collector transistor

• Input circuit insulation : Photocoupler insulation

• Input operation display : LED ON when input is ON

• Ambient temperature : 0 to 55 掳 C. ... Operating -20 to 70 掳 C. ... Save

• Relative humidity : 35 to 85% RH (noncondensing).... in operation

• Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2

• Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 Ten times in each of X, Y, Z directions (80 minutes in total in total) The criterion is based on IEC 61131-2

• Impact resistance : 147 m / s 2 , working time 11 ms, criterion for judgment three times in X, Y, Z directions by sine half-wave pulse is according to IEC 61131-2

• Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 碌s, rising 1 ns, with noise si

• tor with period of 30 to 100 Hz

• Withstand voltage : Between the input terminal of the expansion input block and the ground terminal: 500 V AC for 1 minute

• Insulation resistance : Between the input terminal of the expansion input block and the earth terminal: 500 VDC or more 5 MO or more with the insulation resistance meter

• Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious

• Use altitude : Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.

• Shipping Weight : 1.2 Kg