• Estimated Lead Time: 5-7 Working Days

• Manufacturer: Mitsubishi Electric

• RS-232C for communication special adapter (MODBUS corresponding) FX3U-232ADP-MB

• Transmission standard : RS-232C compliant

• Insulation method : Photocoupler

• Transmission distance : Up to 15m

• External device connection method : D-SUB 9Pin connector (male)

• Communication system : Full-duplex bi-directional

• Communication procedure : 路 MODBUS communication (master or slave)聽- No-protocol communication聽, computer link (dedicated protocol format 1, dedicated protocol format 4)聽programming communication

• communication speed MODBUS communication : 300/600/1200/2400/4800/9600/19200/38400/57600/115200 (bps)聽corresponds to 38400/57600 / 115200bps from products manufactured on or after July 2012.聽(Serial number: 127 **** or later)

• No-protocol communication, computer link : 300/600/1200/2400/4800/9600/19200/38400 (Bps)聽FX3U, FX3UC is, later Ver.2.41, it supports 38400bps.

• Programming communication : 9600/19200/38400/57600/115200 (bps)

• Display (LED) : RD, SD, POWER

• O occupied points : 0 points (no relation to the maximum input and output points of the sequencer)

• Apply sequencer : [FX3S]聽

V1.00 and later: corresponding to all the communication function聽

[FX3G]聽

V1.00 and later: communication functions other than the MODBUS communication to the corresponding聽

V1.30 and later: corresponds to the MODBUS communication function聽

[FX3U]聽

V2.20 and later: other than MODBUS communication communication function to the corresponding of聽

V2.40 and later: corresponds to the MODBUS communication function聽

[FX3GC]聽

V1.40 and later: corresponding to all the communication function聽

[FX3UC]聽

V1.00 and later: corresponds to the communication functions other than the MODBUS communication聽

V2.40 and later: MODBUS corresponding to the communication function聽

• connection to FX3S is required FX3S-CNV-ADP.聽

Connection to the FX3G is required FX3G-CNV-ADP.聽

FX3U, connection to the FX3UC-32MT-LT (-2), you must have the function expansion board.

• mass : 0.08kg

• Power Specifications : 聽

• Power supply : DC5V 30mA (internal power supply from the sequencer)

• Ambient temperature : 0 ~ 55 掳C 路路路路路 operation, -25 ~ 75 掳C 路路路路路 during storage

• Relative humidity : 5 ~ 95% RH (non-condensing) ...... operation

• Vibration resistance When the DIN rail mounting Frequency: 10 ~ 57Hz Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes)

• Frequency: 57 ~ 150Hz Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)

• Direct mounting at the time Frequency: 10 ~ 57Hz Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes)

• Frequency: 57 ~ 150Hz Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)

• Impact : 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each

• Anti-noise : Noise voltage 1,000Vp-p, noise width 1渭s, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator

• Withstand voltage : D-SUB 9Pin connector and between the ground terminal of the basic unit: AC500V 1 minute

• Insulation resistance : D-SUB 9Pin connector and between the ground terminal of the basic unit: DC500V 5M惟 more in insulation resistance tester

• Use atmosphere : Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly

• Advanced use : 2000m or less聽

can not be used in the pressurized environment to more than atmospheric pressure.聽There is a possibility of failure.

• Shipping Weight: 1 Kg