• Estimated Lead Time : In stock. Usually ships in 7-10 working days.

• Manufacturer : Mitsubishi Electric

• FX3U-4AD

• Analog input block FX3U - 4AD

• Analog input Analog input range Voltage input : DC-10 V to +10 V (input resistance 200 k惟)

• Current input : DC-20 mA to + 20 mA, DC 4 mA to 20 mA (input resistance 250 惟)

• Number of input channels : 4 channels

• Absolute maximum input Voltage input : 卤 15 V

• Current input : 卤 30 mA

• Input characteristics : Input mode (voltage / current input) can be set for each channel.

• Digital output Voltage input : 15 bit binary + sign 1 bit

• Current input : 14 bit binary + sign 1 bit

• resolution Voltage input : 0.32 mV (20 V X 1/64000) 2.5 mV (20 V X 1/8000)

• Current input : 1.25 渭A (40 mA X 1/32000 ) 5.00 渭A (40 mA X 1/8000)

• Overall precision Voltage input : Ambient temperature 25 掳 C 卤 5 掳 C 卤 0.3% (卤 60 mV) against full scale 20 V Ambient temperature 0 掳 C to 55 掳 C 卤 0.5% (卤 100 mV) to full scale 20 V

• Current input : Ambient temperature 25 掳 C 卤 5 掳 C: 卤 0.5% (卤 200 渭A) for full scale 40 mA, same for both 4 mA and 20 mA input (卤 200 渭A) Ambient temperature 0 掳 C to 55 掳 C 卤 1% against full scale 40 mA 400 渭A), the same also when inputting 4 mA to 20 mA (卤 400 渭A)

• A / D conversion time : 500 渭s X Number of used channels (5 ms X number of used channels when 1 or more channels of digital filters are used)

• Insulation method : . Isolation between analog input part and sequencer by photo coupler . Insulation between analog input part and power supply by DC / DC converter . No isolation between each channel

• Number of occupied I / O points : 8 points (It can count either input or output)

• Application sequencer :For connection to FX5U, FX5UC, connect with FX5-CNV-BUS or FX5U, FX5U, FX3U (Ver.2.20 or later), FX3UC (FX3UC-32MT- FX5 - CNV - BUSC is required. Depending on the system configuration, please choose either.To connect to FX3UC, FX2NC - CNV - IF or FX3UC - 1PS - 5V is required.

• mass : 0.2 Kg

• Power supply : DC 5 V 110 mA (internal power supply from the sequencer) DC 24 V 卤 10% 90 mA (external power supply)

• Ambient temperature : 0 to 55 掳 C. ... Operating -25 to 75 掳 C. ..... Save

• Relative humidity : 5 to 95% RH (noncondensing).... in operation

• Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)

• Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total)

• Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)

• Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)

• Impact resistance : 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse

• Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 渭s, rising 1 ns, with noise si

• tor with period of 30 to 100 Hz

• Withstand voltage : Between all terminals and ground terminal: 500 VAC for 1 minute

• Insulation resistance : Between all terminals and ground terminal: 500 MV DC 500 M惟 or more with an insulation resistance meter

• ground : Class D grounding (grounding resistance: 100 惟 or less)Grounding should be dedicated ground or common ground.

• Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious

• Use altitude : Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.

• Shipping Weight : 1.2 Kg