• Estimated Lead Time: 5-7 Working Days

• Manufacturer: Mitsubishi Electric

• Analogue output adapter FX3U-4DA-ADP

• Analog output range Voltage output : DC0V ~ 10V (external load 5k惟 ~ 1M惟)

• Current output : DC4mA ~ 20mA (or less external load 500惟)

• Number of output channels : 4 channel

• Output characteristic: For each channel, you can set the output mode (voltage / current output).

• Digital input : 12bit binary

• resolution Voltage output : 2.5mV (10V 脳 1/4000)

• Current output : 4渭A (16mA 脳 1/4000)

• Overall accuracy Voltage output : Ambient temperature 25 掳C 卤 5 掳C: 0.5% 卤聽with respect to full-scale 10V (卤 50mV)聽

ambient temperature 0 掳C ~ 55 掳C: 卤 1.0 %聽for the full-scale 10V (卤 100mV)聽

external load resistance (Rs) is less than 5k惟 If, following the calculation amount will increase.聽(100mV will increase per Pasento 1)聽

(47 脳 100) 梅 (Rs Tasu 47) -0.9 (Pasento)

• Current output : Ambient temperature 25 掳C 卤 5 掳C: 0.5% 卤聽with respect to full-scale 16mA (卤 80渭A)聽

ambient temperature 0 掳C ~ 55 掳C: full scale 16mA for 卤 1.0% (卤 160渭A)

• D / A conversion time FX3U / FX3UC PLC : 200渭s (every calculation cycle update of the data)

• FX3S / FX3G / FX3GC sequencer : 250渭s (every calculation cycle update of the data)

• Insulation method : Analog output section and between the sequencer, insulated by photo-coupler聽is between the power supply and the analog output section, insulated by a DC / DC converter聽is between-each channel, non-isolated

• O occupied points : 0 points (no relation to the maximum input and output points of the sequencer)

• Apply sequencer : FX3S, FX3G, FX3U, FX3GC, FX3UC (FX3UC-32MT-LT聽since Ver.1.20)聽

connection to the FX3S is required FX3S-CNV-ADP.聽

Connection to the FX3G is required FX3G-CNV-ADP.聽

Connection to the FX3U and FX3UC-32MT-LT (-2), you must have the function expansion board.

• mass : 0.1kg

• Power Specifications : -

• Power supply :

DC5V 15mA (internal power supply from the sequencer)聽

DC24V Tasu 20 Pasento -15 Pasento 150MA (external power supply)

• Ambient temperature : 0 ~ 55 掳C 路路路路路 -25 ~ 75 掳C 路路路路路 during storage operations

• Relative humidity : 5 ~ 95% RH (non-condensing) ...... operation

• Vibration resistance When the DIN rail mounting- Frequency: 10 ~ 57Hz : Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes)

• When the DIN rail mounting- Frequency: 57 ~ 150Hz : Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)

• Direct mounting at the time- Frequency: 10 ~ 57Hz : Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes)

• Direct mounting at the time- Frequency: 57 ~ 150Hz : Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)

• Impact : 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each

• Anti-noise : Noise voltage 1,000Vp-p, noise width 1渭s, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator

• Withstand voltage : All terminals and between the ground terminal: AC500V 1 minute

• Insulation resistance : All terminals and between the ground terminal: DC500V 5M惟 more in insulation resistance tester

• Ground: Class D grounding (ground resistance: 100惟 or less) <common ground is not allowed with the high-voltage system>聽

ground, please dedicated ground or shared ground.

• Use atmosphere : Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly

• Advanced use : 2000m or less聽can not be used in the pressurized environment to more than atmospheric pressure.聽There is a possibility of failure.

• Shipping Weight: 1.1 Kg