• Estimated Lead Time : In stock. Usually ships in 7-10 working days.

• Manufacturer : Mitsubishi Electric

• FX3U-ENET-L

• Ethernet interface block FX3U-ENET-L

• Transmission specification Data transmission speed : 100 Mbps, or 10 Mbps

• Communication mode : Full duplex / half duplex

• Transmission method : Baseband

• Maximum segment length : 100 m (length between hub and node)

• Maximum number of nodes / connection 100 Mbps : Maximum 2 cascade connections

• 10 Mbps : Up to 4 cascade connections

• Memory for storing transmission / reception data Number of simultaneous open possibilities : 4 Connection fixed buffer communication: Up to 2 connections (C1, C2) MELSOFT connection + MC protocol: up to 2 connections (C3, C4)

• Fixed buffer : 1023 words X 2

• E-mail (attached file) : 2048 words X 1

• E-mail (body) : 256 words X 1

• E-mail transmission specification (transmission data) Data size (attached file) : 2048 words X 1

• Data size (body) : 256 words X 1

• Data transfer method : Sending: Send either attached file or text (select)

• Subject (subject) : US-ASCII format, or ISO-2022-JP (Base 64)

• Attachment file format : MIME format

• MIME : Version 1.0

• Attachment data format : Binary / ASCII / CSV can be selected File name: XXXX.bin (binary), XXXX.asc (ASCII), XXXX.csv (CSV) (CSV: Comma Separated Value)

• Splitting attachments : Impossible (Only one file can be sent)

• When transmitting (encoding) : Subject: Base64 / 7bit Body: 7bit Attachment: Base64

• encryption : None

• compression : None

• Communication with mail server (SMTP) port number : 1 to 65535 SMTP: 25 (Initial value) SMTP-AUTH: 587

• Authentication method : - No authentication - SMTP - AUTH (PLAIN, LOGIN, CRAM - MD 5) - POP before SMTP

• Communication with mail server (POP) port number : 1 to 65535 POP 3: 110 (Initial value) This setting is required only when POP before SMTP is selected in the SMTP authentication method. You can not receive mail.

• Operation confirmation mailer : Microsoft (R) Corporation Outlook (R) Express 6

• Number of occupied I / O points : 8 points (It can count either input or output)

• Application sequencer : FX3U (V2.21 or higher), FX3UC (V2.21 or higher) ??Up to one connection to the basic unit is possible.To connect to FX3UC, FX2NC - CNV - IF or FX3UC - 1PS - 5V is required.

• mass : 0.3 Kg

• Power supply : DC 24 V + 20%, - 15% Ripple (PP) Within 5%

• Allowable momentary power outage time : Operation continues with an instantaneous power failure of 1 ms or less.

• Current consumption : 24 VDC external power supply: 240 mA

• Ambient temperature : 0 to 55 掳 C. ... Operating, -25 to 75 掳 C. ..... Save

• Relative humidity : 5 to 95% RH (noncondensing).... in operation

• Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)

• Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total)

• Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)

• Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)

• Impact resistance : 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse

• Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 渭s, rising 1 ns, with noise si

• tor with period of 30 to 100 Hz

• Withstand voltage : Between all terminals and ground terminal: 500 VAC for 1 minute

• Insulation resistance : Between all terminals and ground terminal: 500 MV DC 500 M惟 or more with an insulation resistance meter

• Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious

• Use altitude : Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.

• Shipping Weight : 1.3 Kg