• Estimated Lead Time : In stock. Usually ships in 7-10 working days.

• Manufacturer : Mitsubishi Electric

• Q03UDCPU

• Universal model QCPU Q03UDCPU

• control method\n: Stored program iteration operation

• Input / output control method\n: Refresh method\n(Direct access input / output possible by specifying direct access input / output (DX, DY))

• Programming language Sequence control language\n: Relay symbol word, logic symbolic word, MELSAP 3 (SFC), MELSAP-L, function block, structured text (ST)

• processing speed Sequence instructions LD X 0\n: 20 ns

• MOV D 0 D 1\n: 40 ns

• Constant scan\n: 0.5 - 2000 ms (Can be set in 0.5 ms increments)

• Program capacity\n: 30K steps (120K bytes)

• Memory capacity Program memory (drive 0)\n: 120 KB

• Memory card (RAM) (Drive 1)\n: Amount of installed memory card capacity (maximum 8 Mbytes)

• Memory card (ROM) (Drive 2)\n: (Flash card: up to 4 Mbytes, ATA card: up to 32 Mbytes)

• Standard RAM (Drive 3)\n: 192 KB

• Standard ROM (Drive 4)\n: 1024 KB

• CPU shared memory QCPU standard area\n: 8 KB

• High speed communication area between multiple CPUs\n: 32 KB

• Maximum number of stored files Program memory\n: 124

• Memory card (RAM)\n: 319 (when using Q3MEM-8 MBS)

• Memory card (ROM) Flash card\n: 288 books

• ATA card\n: 511 books

• Standard RAM\n: 4

• Standard ROM\n: 256

• Intelligent functional unit Parameter Maximum setting number Initial setting\n: 4096 pieces

• refresh\n: 2048 pieces

• Number of input / output devices\n: 8192 points (X / Y 0 to 1 FFF)

• Number of input / output points\n: 4096 points (X / Y 0 to FFF)

• Number of device points Internal relay [M]\n: Default 8192 points (M0 to 8191) (changeable)

• Latch relay [L]\n: Default 8192 points (L0 to 8191) (changeable)

• Link relay [B]\n: Default 8192 points (B 0 to 1 FFF) (changeable)

• Timer [T]\n: Default 2048 points (T0 to 2047) (Shared by low-speed timer / high-speed timer) (Changeable)\nLow-speed timer / high-\nspeed timer specified by instruction Low-speed timer / high-speed timer measurement unit is set by parameter\n(low-speed timer: 1 to 1000 ms, 1 ms increment, default 100 ms)\n(High-speed timer: 0.1 to 100.0 ms, 0.1 ms increments, default 10.0 ms)

• Integration timer [ST]\n: Default 0 point (Shared with low speed integration timer / high speed integration timer) (Changeable)\nLow speed integration timer / high speed integration timer specified by instruction\nSet the measurement unit of low speed integration timer / high speed integration timer by parameter\n(low speed integration timer: 1000 ms, 1 ms increment, default 100 ms)\n(High-speed integration timer: 0.1 to 100.0 ms, 0.1 ms increments, default 10.0 ms)

• Counter [C]\n: Normal counter: default 1024 points (C 0 ~ 1023) (changeable)

• Data register [D]\n: Default 12288 points (D 0 to 12287) (changeable)

• Extended data register [D]\n: Default 0 point (changeable)

• Link register [W]\n: Default 8192 points (W 0 to 1 FFF) (changeable)

• Extended link register [W]\n: Default 0 point (changeable)

• Annunciator [F]\n: Default 2048 points (F 0 to 2047) (changeable)

• Edge relay [V]\n: Default 2048 points (V 0 to 2047) (changeable)

• File register [R] Standard RAM\n: 32768 points (R 0 ~ 32767)\nMaximum 98304 points can be used by block changeover

• SRAM card (1 Mbyte)\n: 32768 points (R 0 ~ 32767)\nMaximum 517120 points can be used by block switching

• SRAM card (2 Mbytes)\n: 32768 points (R 0 to 32767)\nMaximum 1041408 points can be used by block switching

• SRAM card (4 Mbytes)\n: 32768 points (R 0 ~ 32767)\nUp to 2087936 points can be used by block changeover

• SRAM card (8 Mbytes)\n: 32768 points (R 0 ~ 32767)\nUp to 4184064 points can be used by block changeover

• Flash card (2 Mbytes)\n: 32768 points (R 0 to 32767)\nMaximum 1041408 points can be used by block switching

• Flash card (4 Mbytes)\n: 32768 points (R 0 ~ 32767)\nUp to 2087936 points can be used by block changeover

• File register [ZR] Standard RAM\n: 98304 points (ZR 0 to 98303) No\nblock switching required

• SRAM card (1 Mbyte)\n: 517120 points (ZR 0 to 517119) No\nblock switching required

• SRAM card (2 Mbytes)\n: 1041408 points (ZR 0 to 1041407) No\nblock switching required

• SRAM card (4 Mbytes)\n: 2087936 points (ZR 0 to 2087935)\nBlock switching not required

• SRAM card (8 Mbytes)\n: 4184064 points (ZR 0 to 4184063)\nBlock switching not required

• Flash card (2 Mbytes)\n: 1041408 points (ZR 0 to 1041407) No\nblock switching required

• Flash card (4 Mbytes)\n: 2087936 points (ZR 0 to 2087935)\nBlock switching not required

• Link special relay [SB]\n: Default 2048 points (SB 0 to 7 FF) (changeable)

• Link special register [SW]\n: Default 2048 points (SW 0 to 7 FF) (changeable)

• Step relay [S]\n: Default 8192 points (S0 to 8191) (changeable)

• Index register / general operation register [Z]\n: Up to 20 points (Z 0 ~ 19)

• Index register [Z] (when ZR device 32-bit qualifier is specified)\n: Up to 10 points (Z0 to 18) (Use index register [Z] as double word)

• Pointer [P]\n: 4096 points (P 0 ~ 4095) (Number of device points fixed)\nUse range of local pointer / common pointer can be set by parameter

• Interrupt pointer [I]\n: 256 points (I 0 to 255) (the number of device points is fixed)\nPeriodic interval of system interrupt pointer I 28 to 31 can be set by parameter (0.5 to 1000.0 ms, 0.5 ms increments)\nDefault I 28: 100 ms, I 29: 40 ms, I 30: 20 ms , I31: 10 ms

• Special relay [SM]\n: 2048 points (SM 0 to 2047) (Device number is fixed)

• Special register [SD]\n: 2048 points (SD 0 to 2047) (the number of device points is fixed)

• Function input [FX]\n: 16 points (FX 0 to F) (Device number is fixed)

• Function output [FY]\n: 16 points (FY 0 to F) (the number of device points is fixed)

• Function register [FD]\n: 5 points (FD 0 ~ 4) (Device number is fixed)

• Intelligent functional unit device\n: Device specification that directly accesses buffer memory of intelligent function\nmodule Format: U ?? G ??

• Latch (power outage hold) range\n: L 0 to 8191 (default 8192 points)\n[latch range can be set for B, F, V, T, ST, C, D, W]

• RUN / PAUSE contact\n: One point of each RUN / PAUSE contact can be set from X 0 to 1 FFF

• Clock function\n: Year, month, day, hour, minute, second, day of the week (leap year automatic discrimination)\naccuracy: -2.96 ~ + 3.74s (. TYP + 1.42s) / d at 0 ?\naccuracy: -3.18 ~ + 3.74s (TYP + . 1.50 s) / d at 25 掳 C.\nAccuracy: -13.20 to +2.12 s (TYP. -3.54 s) / d at 55 掳 C.

• Allowable momentary power failure time\n: Depends on power supply unit

• DC 5 V Internal current consumption\n: 0.33 A

• External dimensions Height (H)\n: 98 mm

• Width (W)\n: 27.4 mm

• Depth (D)\n: 89.3 mm

• mass\n: 0.20 kg

• Operating ambient temperature\n: 0 to 55 掳 C

• Storage ambient temperature\n: -25 to 75 掳 C\n(-20 to 75 掳 C when system includes AnS / A series unit)

• Ambient operating humidity\n: 5 to 95% RH, non condensing\n(10 to 90% RH when the system includes AnS / A series unit)

• Storage ambient humidity\n: 5 to 95% RH, non condensing\n(10 to 90% RH when the system includes AnS / A series unit)

• Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration\n: Frequency: 5 to\n8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2\nSweep count: 10 times in X, Y, Z directions

• When there is continuous vibration\n: Frequency: 5 to\n8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2

• Impact resistance\n: Meets JIS B 3502, IEC 61131-2\n(147 m / s 2 , 3 times in each of X, Y and Z directions)

• Use atmosphere\n: No corrosive gas

• Use elevation\n: 0 to 2000 m

• Installation location\n: In the control panel

• Over voltage category\n: II or less

• Pollution degree\n: 2 or less

• Device class\n: Class I

• Shipping Weight : 2 Kg