• Estimated Lead Time : In stock. Usually ships in 7-10 working days.

• Manufacturer : Mitsubishi Electric

• QD65PD2

• Multifunction counter / timer unit QD65PD2

• Number of channels : 2 channels

• Counting speed change setting : At differential input: 10 kpps / 100 kpps / 200 kpps / 500 kpps / 1 Mpps / 2 Mpps (at 1/2/4 multiplication) 4 Mpps (at 2/4 multiplication) 8 Mpps (at 4 multiplication) DC input: 10 kpps / 100 kpps / 200 kpps / 2/4 multiplication)

• Count input signal phase : One phase input (1/2 multiplication), 2 phase input (1/2 multiplication / 4 multiplication), CW / CCW input

• Signal levels (蠁A, 蠁B) : Differential input: EIA standard RS - 422 - A differential line driver level (AM 26 L 31 31 (manufactured by Texas Instruments Incorporated)) DC input: DC 5/12/24 V 7 to 10 mA

• counter Counting speed (highest) : Differential input: 8 M pulse / s (2 phase multiplied by 4) DC input: 200 k pulse / s

• Count range : 32 bit signed binary (-2147483648 to 2147483647)

• Model : Addition method, Subtraction method Linear counter type, Ring counter type Preset counter function, Latch counter function

• Minimum count pulse width (duty ratio 50%) One phase input (1/2 multiplication), CW / CCW : Minimum pulse width: 0.25 渭s at the time of differential input: 0.5 渭s (ON / OFF each 0.25 渭s), 1 phase multiplied by 2, DC input: 5 渭s (ON / OFF each 2.5 渭s), 1 phase 2 multiplication, minimum pulse Width: 2.5 渭s

• Two-phase input (1/2/4 multiplication) : Minimum pulse width: 0.125 渭s DC input: 20 渭s (ON / OFF each 10 渭s), 2 phase 4 multiplication, minimum pulse width (ON / OFF each 0.25 渭s)>: 5 渭s

• Match detection Comparative range : 32 bit signed binary

• Comparison method Match output : Set value count value

• Output within range : Setting value (lower limit) ??count value ??set value (upper limit)

• Out of range output : Count value

• interrupt : Match detection interrupt function available

• External input Z phase : Differential input: EIA standard RS-422-A Differential line driver level (AM 26LS 31 (Japan Texas Instruments Inc.)): 2 points DC input: DC 5/12/24 V 7 to 10 mA: 2 points

• function : DC 5/12/24 V 7 to 10 mA: 2 points

• Latch counter : DC 5/12/24 V 7 to 10 mA: 2 points

• General purpose input (high speed) : DC 24 V 7 to 10 mA: 2 points

• General purpose input (low speed) : DC 24 V 3 mA: 4 points

• External output Matching output (high speed) : Transistor (sink type) Output: 2 points DC12 / 24V 0.1 A / 1 point, 0.8 A / 1 common

• Match output (low speed) : Transistor (sink type) Output: 6 points DC12 / 24V 0.1 A / 1 point, 0.8 A / 1 common

• General purpose output : Transistor (sink type) Output: 8 points DC12 / 24V 0.1 A / 1 point, 0.8 A / 1 common

• Pulse measurement Measurement item : Pulse width (ON width / OFF width)

• Measurement resolution : 100 ns

• Number of measurement points : 2 points / channel

• Cam switch Number of output points : 8 points

• Number of steps per output : Up to 16 steps / 1 point

• Control cycle : 1 ms

• Variations between outputs within the channel : 100 渭s or less

• PWM output Output frequency range Matching output (high speed) : DC up to 200 kHz

• Match output (low speed) : DC up to 2 kHz

• Duty ratio : Optional (Can be set in increments of 0.1 渭s)

• External wiring connection method : 40 pin connector X 2

• Applicable connector : A6CON1, A6CON2, A6CON4 (sold separately)

• Number of occupied I / O points : 32 points (I / O assignment: 32 points of intelligence)

• DC 5 V Internal current consumption : 0.23 A

• External dimensions Height (H) : 98 mm

• Width (W) : 27.4 mm

• Depth (D) : 90 mm

• mass : 0.15 Kg

• Shipping Weight : 1.2 Kg